Honda Accord Radio Code Reset (5 Free Methods)

The Honda Accord stereo code was introduced by Honda as an enhanced security feature to protect car radios from theft.

However, over time, common customer complaints have arisen regarding the inconvenience this feature causes!

Although the change has protected radios, it is now causing a lot of issues for owners themselves.

Honda Accord Radio Code

Table of Contents :

When Do You Need To Enter The Code?

Whether you are replacing your 2008 Honda Accord car radio or changing your battery or fuse, as soon as the electric circuit of the radio breaks, it gets automatically locked and the radio says code.

As a result, you won’t be able to turn on your radio, without entering the code.

So if your radio is locked, keep reading, I will show you 5 easy methods to get your Accord radio code for free.

Method 1 : Bypass Honda Accord Radio Code With The Power Button

In most cases, you can bypass the Honda radio code by simply pressing and holding the power button for a few seconds until you see the radio reactivated.

This is the first method you should try. It is the easiest and fastest one, and does not require any code to unlock the radio.

Method 2 : Check The Owner’s Manual For Radio Code Information

Most users after going through a lot of trouble generating the code find out that it was written on top of their owner’s manual or on the Anti-theft Radio ID card.

So, make sure if there is a four or five-digit code written on top of your owner’s manual or on your car documents.

If you find it, all you have to do now is to enter the code to the stereo unit.

Method 3 : Take a Look Inside Your Glove Box

Sometimes the 2008 Honda Accord radio code can be listed on a small white sticker inside the Glovebox. You can find this sticker on the outer-left or on the inner-left surface (see image).

code inside glove compartment

Method 4 : Ask a Local Dealership For The Code

Although some dealers may give out codes for free, others may require that you come in to the dealership.

If you’re lucky, you may be able to get the code in a single phone call and then, go through the Honda code entry instructions below.

However, if you’re not so lucky with any Honda dealer, I will show you another method to get your code for free.

Method 5 : Online Honda Accord Radio Code Calculator

If you can’t find the code anywhere, don’t worry.

It is possible to use the Honda Radio Code Calculator to unlock your car stereo.

This online software is able to generate Honda codes from the serial number of the unit (see below how to get the serial number).

You will only need to find and enter the serial number, then click Generate Code!

And voila, your stereo code will be sent by email and will also be added to the list of Honda radio codes.

Get Your Code Now !

Alternatively, you can try this link : https://radio-navicode.honda.com/ (but you will need to provide identity verification and vehicle information to get the code).

How To Find The Honda Accord Radio Serial Number?

So, we need to find the radio unit serial number to calculate the code.

Unlike most manufacturers, Honda provides an easy way to get the stereo unit serial number without pulling it out.

honda accord radio serial number

Here are the steps :

  1. Turn on the stereo power by either turning the car keys to ACC or ON mode. There is no need to turn on the engine.
  2. When the radio gets the power, press the two digits buttons 1 and 6 and hold them. For 2003 – 2007 Accord with Navigation System, press and hold the top of the SEEK/SKIP and CH/DISC buttons.
  3. Press the ON button.
  4. There will be eight digits displayed in two groups of four digits. Ex: U7592 L3084
  5. Ignore the U and L and note down the eight digits, with the digits appearing first at the beginning. Ex: 75923084

If this method is not working for you, then you have to pull the stereo unit and look for the serial number on the side or the rear, it’s probably on a sticker somewhere on it. Please check the Honda radio removal guide for more details (video tutorial! ).

Honda Accord Code Entry Instructions

To enter your Honda Accord radio code, use the radio preset buttons. This will unlock the radio and reset the audio system.

The code entry process is very easy, but you need to be careful!!

  • Be sure you have the right code.
  • If you enter wrong digits, the stereo unit will freeze for a certain amount of time.
  • Code entry is not the same for cars With Navigation System and models Without Navigation. Honda navi code requires a different method!
  • If you get a Honda Accord radio code error, there will be other steps to do!

Visit the Honda Accord Code Entry tutorial to know the exact steps you will need to follow to avoid making common mistakes!

Conclusion

Whether you buy a pre-owned car or an aftermarket radio, you will most probably not have the Honda Accord code for radio. This step-by-step guide makes it a simple process that actually takes less than five minutes to generate and enter the code.

If you need help and if you get Honda Accord radio code error, you can post comments here or email me and I will be more than happy to help.

Don’t forget to like, share and sign up for the newsletter to stay updated with the latest Honda automotive technology.

Check Also

LDW Light On Honda Accord

4 Common Questions About LDW Light On Honda Accord

What is LDW in Honda Accord? The LDW, or Lane Departure Warning, is a feature …